Mods - DIRTY PENNY VAPE & ALE

DIRTY PENNY VAPE & ALE

PURGE SLAM PIECE

$300.00

Only a few left!

PURGE SLAM PIECE

Purge mods have a revolutionary NEW side fire design and a simple yet exquisite battery rattle adjustment, and the flexibility to customize every aspect of the mod to the users liking with future accessories. This Mod is compatible with 21700, 20700, 20650, 18650 Batteries!!

The Slam Piece Mod features some simple engraving which is CNC machined, deep into the tube. The button housing is comprised of Black Ultem Saftey cup in and one beefy copper contact cup to pack one hell of hit. The threading on each mod is flawless and they are weighty too, these mods ooze high-end quality. Each mod comes with a rugged, hard shell carry case.

Slam Piece Mod Features

30mm body
Unique Side Fire Button
Locking Feature
Unique sleeve top cap design
Fully adjustable button to compensate for battery rattle
Deep CNC engravings
Serialized
Hybrid top cap
Locally made in Orlando U.S.A

Slam Piece Mod Contents

1 x Slam Piece Purge mod
1 x Hard shell carry case
1 x Certificate of authenticity

Please note, because of the nature of these materials, these mods may have grub / tarnishes on them - that's just the nature of the material.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

PURGE PANDORA BLUE 20700 MECH

$420.00 $415.00

Only a few left!

PANDORA BLUE 20700 MECH MOD

Features

464 Naval Brass Chassis
Double-Wall Body
Bare Top Section
Cerakoted Bottom/Interior Section
Deep CNC Engravings
Serialized
Locally Made in Orlando, Fl.
Accepts Single 18650 or 20700 Battery Cell
Delrin 18650 Adapter Included
Signature Purge Firing Switch
Copper Battery Contact
Three Rare Earth Neodymium Magnets
Blue Delrin Button Inlay
Hybrid 510 Connection
Diameter: 26mm
Tapers to 25mm

Box Contents

1x Pandora Blue 20700 Mech MOD by Purge Mods

1x Purge Mods Hard Case

1x Purge Mods Authenticity Card

For Pandora Blue herself, this mod features a death moth as envisioned by Mathew Hagermann.

3-piece design with sleeve in our signature “Pandora Blue”

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE SUICIDE QUEEN 20700

$425.00 $410.00

Only a few left!

PURGE SUICIDE QUEEN 20700

All hail to the queen,

The most famous PURGE design from Matthew Haggerman is back this time, it's 20700 ready.

Features

464 Naval Brass Chassis
Double-walled body
Heat-Resistant
Patent pending
Deep CNC Engravings
Hagermann Artistic Design
serialized
Accepts Single 20700 Battery Cell
Copper Battery Contact
Includes 18650 adapters
Magnetic Switch
Copper Battery Contact
Fully adjustable
Hybrid 510 Connection

Box Contents

1x "Suicide Queen" 20700 Mech MOD by Purge Mods
1x 18650 Sleeve Adapter
1x Purge Mods Hard Carrying Case
1x Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE SUICIDE KING MURDERED OUT 20700

$449.00 $430.00

Only a few left!

PURGE SUICIDE KING MURDERED OUT 20700

Features

Copper Chassis
Double-Wall Body
Heat-Resistant
Patent Pending
Deep CNC Engravings
Hagermann Artistic Design
Serialized
Accepts Single 18650 or 20700 Battery
Copper Battery Contact
Includes Delrin 18650 Adapter
Hybrid 510 Connection
Recessed Magnetic Switch
Copper Battery Contact
Diameter: 25mm
Tapers from 26mm

Box Contents

1x Murdered Out "Suicide Kings" 20700 Mech MOD by Purge Mods
1x 18650 Sleeve Adapter
1x Purge Mods Hard Carrying Case
1x Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE ULTEM SQUONK BOX “HAGERMANN” EDITION

$325.00 $250.00

Only a few left!

PURGE ULTEM SQUONK BOX “HAGERMANN” EDITION

The compact and light weight ultem squonkers with Matthew Hagermann’s signature brass door.

Features

Solid 464 Naval Brass / ULTEM Chassis
Large Engraving
Designed by Mathew Hagermann
Brass Firing Switch
8.5mL Black Silicone Purge Squonker Bottle
ULTEM Housing & Cap
Includes 15mL Refill Bottle
Accepts Single 18650 or 20700 Battery
Gold-Plated Battery Contacts
ULTEM Battery Sled
Delrin 18650 Battery Adapter Included
Negative Pole Inserted First
Mechanical Operation
Floating Gold-Plated Positive Pin
Stainless Steel 510 Threads
Dimensions: 84mm x 58mm x 27mm

Box Contents

1x ULTEM Mechanical Squonk Box "Hagermann Edition" by Purge Mods
1x 8.5mL Black Silicone Purge Squonker Bottle
1x 15mL Black Silicone Purge Squonker Bottle
1x Delrin 18650 Battery Adapter
1x Battery Removal Ribbon
Spare 510 PEEK & O-Rings
1x Purge Mods Hard Case
1x Purge Mods Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

XRAYBOX MODS TRIPLE SERIES 18650 ADVANCED PWM

$250.00 $225.00

Only a few left!

XRAYBOX MODS TRIPLE SERIES 18650ADVANCED PWM

With Smart Start self diagnostic startup that tests the switch and mosfet for proper function before it unlocks the mod for use. It has a 5 click off/on function, 8 sec timeout, low voltage cutoff and shows voltage, rms voltage, %, battery state, lock state, photo and video mode, hit counter, test mode lockout state etc... it’s simply the most advanced pwm made.

The enclosure is Cnc anodized aircraft aluminum custom milled and mopa laser engraved. The enclosure uses 8 n52 magnets for the most secure lid possible. The 510 uses ceramic glass insulator and is rated for over 2000 Watts and is perfectly recessed so you can use 30mm rdas without scratching your mod. The sled is high temp pressure molded and not 3D printed. All circuit connections are made throughout with high silver solder.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

XRAY BOX MODS DUAL 20700 PWM

$230.00 $215.00

Only a few left!

XRAY BOX MODS DUAL 20700 PWM

XRayBoX Mods Advanced PWM

With Smart Start self diagnostic startup that tests the switch and mosfet for proper function before it unlocks the mod for use. It has a 5 click off/on function, 8 sec timeout, low voltage cutoff and shows voltage, rms voltage, %, battery state, lock state, photo and video mode, hit counter, test mode lockout state etc... it’s simply the most advanced pwm made.

The enclosure is Cnc anodized aircraft aluminum custom milled and mopa laser engraved. The enclosure uses 8 n52 magnets for the most secure lid possible. The 510 uses ceramic glass insulator and is rated for over 2000 Watts and is perfectly recessed so you can use 30mm rdas without scratching your mod. The sled is high temp pressure molded and not 3D printed. All circuit connections are made throughout with high silver solder.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

XRAY BOX MODS DUAL 20700 SQUONK

$240.00

Out of stock

XRAY BOX MODS DUAL 20700 SQUONK

XRayBoX Mods Advanced PWM

With Smart Start self diagnostic startup that tests the switch and mosfet for proper function before it unlocks the mod for use. It has a 5 click off/on function, 8 sec timeout, low voltage cutoff and shows voltage, rms voltage, %, battery state, lock state, photo and video mode, hit counter, test mode lockout state etc... it’s simply the most advanced pwm made.

The enclosure is Cnc anodized aircraft aluminum custom milled and mopa laser engraved. The enclosure uses 8 n52 magnets for the most secure lid possible. The 510 uses ceramic glass insulator and is rated for over 2000 Watts and is perfectly recessed so you can use 30mm rdas without scratching your mod. The sled is high temp pressure molded and not 3D printed. All circuit connections are made throughout with high silver solder.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

JYNX POD SYSTEM FROM CRAVING VAPOR

$8.99 - $39.99

Only a few left!

JYNX Pod System from Craving Vapor

2ml capacity refillable pod

1100 mah battery

0.25 ti coil

Temperature control device

DIRTY PENNY LE 20700/18650 BRASS TUBES

$192.50 $180.00

Only a few left!

DIRTY PENNY LE 20700/18650 BRASS TUBES

Brass materials, copper pin, spring operated

25mm body 100mm length 2 finishes available Black or straight Brass sleeves

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

THE GRIP IMMORTAL MODZ BY ARMAGEDDON MFG

$310.00 - $320.00

Only a few left!

THE GRIP IMMORTAL MODZ BY ARMAGEDDON MFG

24mm Diameter
89mm Height
Clip Activated Device (C.A.D)
Bottom locking mechanism (ON/ OFF)
Constant contact design
A.V. Inspired top hat
Hybrid Mod
Trillium copper contacts
Serialized
Battery Size 18650,20650,20700,21700
Insulated Top Cap And Button (Hard Short Protection)

Box Contents

1x The Grip 20700 & Mech MOD
2x Spare Screws

DISCLAIMER:

This device is a hybrid mod. We DO NOT recommend this device for beginners. We recommend that before you purchase this device that you have a full understanding of battery safety.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

PURGE ENFORCER BLACK

$379.00 $350.00

Out of stock

PURGE ENFORCER BLACK

**Carnage Deck Not Included**

The Enforcer by Purge Mods is a real looker, heavy hitting piece of hardware. The mod is wider than previous designs, 29mm diameter and tapers to 28mm at the top which ensures for a minimum voltage drop and maximum output and features some exquisite CNC machine work and knurling on the grip area. Designed for 21700/20700/18650 batteries.

The Enforcer also comes with a cap, which is only designed for the Carnage RDA and features an ultem drip tip and dual cyclops airflow.

The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit, one beefy copper contact pin and has a ultem throw button, which can be customised with other designs in the future.

The Enforcer oozes high end quality and comes with a rugged, hard shell carry case.

THE ENFORCER MOD FEATURES29mm body
Tapers to 28mm on top
Carnage RDA slam cap with ultem drip tip
Fully adjustable button to compensate for battery rattle
Ultem throw button
Deep CNC engravings
Serialized
Hybrid top
Locally made in Orlando U.S.

The Enforcer Mod Contents

1 x Enforcer Mod
1 x Brass carnage RDA slam cap
1 x Hard shell carry case
1 x Certificate of authenticity

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE ENFORCER BRASS

$349.00 $330.00

Only a few left!

PURGE ENFORCER BRASS

**Carnage Deck Not Included**

The Enforcer by Purge Mods is a real looker, heavy hitting piece of hardware. The mod is wider than previous designs, 29mm diameter and tapers to 28mm at the top which ensures for a minimum voltage drop and maximum output and features some exquisite CNC machine work and knurling on the grip area. Designed for 21700/20700/18650 batteries.

The Enforcer also comes with a cap, which is only designed for the Carnage RDA and features an ultem drip tip and dual cyclops airflow.

The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit, one beefy copper contact pin and has a ultem throw button, which can be customised with other designs in the future.

The Enforcer oozes high end quality and comes with a rugged, hard shell carry case.

THE ENFORCER MOD FEATURES29mm body
Tapers to 28mm on top
Carnage RDA slam cap with ultem drip tip
Fully adjustable button to compensate for battery rattle
Ultem throw button
Deep CNC engravings
Serialized
Hybrid top
Locally made in Orlando U.S.A

The Enforcer Mod Contents

1 x Enforcer Mod
1 x Brass carnage RDA slam cap
1 x Hard shell carry case
1 x Certificate of authenticity

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE KING 20700 BLOOD STAIN

$325.00 $295.00

Only a few left!

PURGE KING 20700 BLOOD STAIN

464 Naval Brass Construction
Single Set of Body Threads
CNC Engraving
Locally Made in Orlando
Accepts Single 20700 or 18650 Battery
Copper Battery Contact
18650 Battery Sleeve Included
Hybrid 510 Connection
Signature Beefy Purge Firing Switch
Serialized
Diameter: 26mm
Tapers to 25mm

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE MODS "THE TRUCK" FIRETRUCK EDITION

$240.00 $235.00

Out of stock

Purge Mods The Truck Firetruck Edition

Copper base and then Cerakoted red
Single Set of Body Threads
CNC Engraving
Locally Made in Orlando
Accepts Single 18650 or 20700 Battery
Delrin 18650 Battery Adapter Sleeve
Hybrid 510 Connection
Signature Beefy Purge Firing Switch
Copper Battery Contact
Diameter: 26mm
Tapers to 25mm

Box Contents

1x The Truck 20700 Mech MOD by Purge Mods
1x Purge Mods Hard Carrying Case
1x Purge Mods Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE 20700 KNURLED ASSASSIN TUBE

$110.00

Only a few left!

PURGE 20700 FIRETRUCK ASSASSIN TUBE

PURGE 20700 KNURLED BLACK ASSASSIN TUBE

A Knurled Red Copper assassin tube Cerakoted to match your favorite truck. "Brass for the knurled Black"

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

PURGE THE TRUCK KNURLED 20700/18650 BRASS OR BLACK

$215.00 - $235.00

Only a few left!

PURGE THE TRUCK KNURLED 20700/18650 BRASS OR BLACK

464 Naval Brass or C145 Tellurium Copper Chassis
Single Set of Body Threads
CNC Engraving
Locally Made in Orlando
Accepts Single 18650 or 20700 Battery
Delrin 18650 Battery Adapter Sleeve
Hybrid 510 Connection
Signature Beefy Purge Firing Switch
Copper Battery Contact
Diameter: 26mm
Tapers to 25mm

 Box Contents

1x The Truck 20700 Mech MOD by Purge Mods
1x Purge Mods Hard Carrying Case
1x Purge Mods Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE MODS BACK TO BASIC V3

$159.00 - $179.00

Only a few left!

PURGE MODS BACK TO BASIC V3

Features

C145 Tellurium Copper or 464 Naval Brass Construction
Single Set of Body Threads
CNC Engraving
Locally Made in Orlando
Black Finish Placed Over Copper Chassis
Accepts Single 18650 -or- 20700 Battery
Copper Battery Contact
18650 Battery Sleeve Included
Copper Engraved Contact
Contacts Positive Pole**
Hybrid 510 Connection
Signature Beefy Purge Firing Switch
"Purge" Logo Switch Engraving
Diameter: 26mm
Tapers to 25mm

Box Contents

1x Back To Basic V3 20700 Mech MOD by Purge Mods
1x 18650 Battery Sleeve
1x Purge Mods Hard Carrying Case
1x Purge Mods Authenticity Card

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE MODS “BACK TO BASIC V3” TUNGSTEN SPLATTER

$185.00

Out of stock

This is a Back to Basic v3 with a Tungsten cerakote and black/Green splatter!

Includes and 18650 Adapter Sleeve.

The Back to Basic V3 is a familiar face with a 20700 battery configuration.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

PURGE REPLACEMENT MAGNETS

$11.99

Only a few left!

PURGE REPLACEMENT MAGNETS

The PURGE Replacement Magnets kit is available to you NOW!
This kit includes:

2 smaller magnets for the housing
1 larger magnet for the button

Rare Earth Neodymium Magnets
Fits All Purge Mech Mods

3 PIECE.... 1X LARGE, 2X SMALL

PURGE SILVER SPRINGS MEDIUM OR HEAVY THROW

$21.00 $19.00 - $21.00

Only a few left!

PURGE SILVER SPRINGS

These are solid silver replacement springs instead of your traditional magnets

Solid Silver Spring
- Replaces Stock Firing Switch Magnets
- Improves Conductivity
- Available with Medium or Heavy Throw
Compatible With All Purge Mech Mods

REACTOR BY MCV PHILIPPINES SN#0022

$345.00 $335.00

Only a few left!

REACTOR BY MCV PHILIPPINES

Behold the new beast in squonk box mod.

The REACTOR squonk box

By MCV PHILIPPINES

Specification:

*Full t6 aluminum body construction

*copper internals

*magnetic door lock

*stainless 510 connector and squonk tubing pin. Fits diameter 18mm to 19mm squonk bottles

*Peek insulated positive pin

*ultem firing button

*for single 18650 battery

*can accommodate 22mm to 25mm squonk atomizer.

Try and feel the blast of the REACTOR!

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

THE EVIL TWINS STACKED TUBE STAINLESS BY DEATHWISH MODZ

$224.00 $210.00

Only a few left!

THE EVIL TWINS STACKED TUBE STAINLESS

Featuring a ONE PIECE solid tube with the classic and critically acclaimed Crossbones V2 switch, this beast of a mod is fueled by 2x 20650 cells, or 2x 18650 cells with a specially designed adapter. The stacked Crossbones V2 delivers incredible power, and amazing switch mechanism for an unique

The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place.

Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils.

Here's what's included with the EVIL TWIN kit :

The CROSSBONES V2 STACKED tube.
The Unholy RDA V2.
Special design sleeve for 18650 compatibility.
Hybrid top contact disc.
Misc parts.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

THE EVIL TWINS STACKED TUBE BRASS BY DEATHWISH MODZ

$224.00 $210.00

Out of stock

THE EVIL TWINS STACKED TUBE BRASS

Featuring a ONE PIECE solid tube with the classic and critically acclaimed Crossbones V2 switch, this beast of a mod is fueled by 2x 20650 cells, or 2x 18650 cells with a specially designed adapter. The stacked Crossbones V2 delivers incredible power, and amazing switch mechanism for an unique

The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place.

Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils.

Here's what's included with the EVIL TWIN kit :

The CROSSBONES V2 STACKED tube.
The Unholy RDA V2.
Special design sleeve for 18650 compatibility.
Hybrid top contact disc.
Misc parts.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

THE EVIL TWINS STACKED TUBE GUNMETAL BY DEATHWISH MODZ

$224.00 $210.00

Only a few left!

THE EVIL TWINS STACKED TUBE GUNMETALBY DEATHWISH MODZ

Featuring a ONE PIECE solid tube with the classic and critically acclaimed Crossbones V2 switch, this beast of a mod is fueled by 2x 20650 cells, or 2x 18650 cells with a specially designed adapter. The stacked Crossbones V2 delivers incredible power, and amazing switch mechanism for an unique

The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place.

Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils.

Here's what's included with the EVIL TWIN kit :

The CROSSBONES V2 STACKED tube.
The Unholy RDA V2.
Special design sleeve for 18650 compatibility.
Hybrid top contact disc.
Misc parts.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

THE EVIL TWINS STACKED TUBE COPPER BY DEATHWISH MODZ

$224.00 $210.00

Out of stock

THE EVIL TWINS STACKED TUBE COPPER

Featuring a ONE PIECE solid tube with the classic and critically acclaimed Crossbones V2 switch, this beast of a mod is fueled by 2x 20650 cells, or 2x 18650 cells with a specially designed adapter. The stacked Crossbones V2 delivers incredible power, and amazing switch mechanism for an unique

The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place.

Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils.

Here's what's included with the EVIL TWIN kit :

The CROSSBONES V2 STACKED tube.
The Unholy RDA V2.
Special design sleeve for 18650 compatibility.
Hybrid top contact disc.
Misc parts.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

PURGE ULTEM SQUONK BOX

$290.00

Out of stock

Purge Ultem Squonk Box

The squonk box has been downsized just a little bit and been made of Ultem.

The boxes will have resin/stabwood doors in a variety of colors.

ALL boxes come with a pre-installed matching button AND a 25mm beauty ring and matching drip tip.

NOTE: Colors will vary from photographed displays.

NOTE: Some models will have stab wood in it as well and will vary from box to box.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

Purge Mod Back to Basics V3 "Viper"

$184.99

Out of stock

Purge Mod Back to Basics V3 "Viper"

The V3 that you know and love just got a little less basic.

Purple Cerakote

20700 with an 18650 adapter sleeve.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

Purge Mods “Turbo” Edition

$299.99 - $320.00

Out of stock

Purge Mods “Turbo” Edition

This mod is named after the man himself, Turbo 616

These ergonomically designed mods sport a modern kryptek design shared by the idol who inspired it and shaved angles for comfort and design.

20700 battery configured mods.

Brass Or Distressed

Distressed IsCerakoted flat black and then brushed to see the brass underneath.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

Purge Mod “Hagermann” Edition Serenity Edition Copper

$350.00

Out of stock

Purge Mod “Hagermann” Edition Serenity Edition Copper

18650 Compatible

The latest Fully engraved artwork By Matthew Hagermann. This piece is a true work of art.

The Serenity Koi fish.

All mod components are machined and manufactured locally in Orlando, Florida in the United States of America.

WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.

There are no warranties or refunds.

VANDY VAPE PULSE BF KIT 18650/20700

$50.00

Out of stock

VANDY VAPE PULSE SQUONK KIT

Size: 100*50*27mm

Thread Type: Spring loaded 510

Battery: 18650/20700(Battery not included)

Capacity: 8ml

G.W(included package): 250g

Material: Nylon+ABS(High temperature resistant)

kit Contents

1*Pulse BF BOX MOD

1*18650 Battery Adaptor

1*Pulse 24 BF RDA-Special Edition

VANDY VAPE PULSE BF 80WATT BOX MOD 20700/18650

$50.00 - $55.00

Only a few left!

VANDY VAPE PULSE BF 80WATT BOX MOD 20700/18650

Pulse 80w Box Mod with VANDY CHIP

80w regulated / adjustable wattage

Rapid firing and precise output control

510 connector with the creative leaking proof design

Easy grip squonk bottle

18650/20700 battery compatibility