International shipping not available at this time..
Free Shipping On All Orders Over $50
By Purchasing You Declare That You are 18 Years of Age or Older
FATALITY M25 25MM RTA - QP DESIGN (PRE-ORDER) ***SHIPS LATE MARCH***
$80.00
FATALITY M25 25MM RTA - QP DESIGN (PRE-ORDER)
-25mm Diameter
-Airflow stopper (No free spinning)
-Threaded deck (No Clip)
-Ultem Airflow insert
- Reduces airflow
- Increases flavor
- Reduces condensation build up
- Warmer and dense vape
-Clip top cap for top filling (No thread)
-Side terminal postless deck (Dual coil or single)
-Multi coil configuration
-Replace cotton or Coils without emptying your juice
-Twist to close juice ports on filling for no leaking
-Fast and easy cotton or coil replacement
-Adjustable quad airflow
-Unique airflow Adjustment
(Top airflow ring controls side angled airflow)
(Bottom airflow ring controls center airflow)
Included with each kit
-Clear 810 Drip Tip
-2ml insert for TPD
-4ml Glass tank
-5.5ml Glass tank
-Accessory bag
-Flat head screws
-Black O-rings
-Serial number/Authentication Card
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
FATALITY RTA 2ML GLASS REPLACEMENT ASSORTED COLORS
$15.00
FATALITY RTA 2ML GLASS REPLACEMENT ASSORTED COLORS
THIS PRODUCT IS FOR THE GLASS ONLY
RTA, MOD, TIP NOT INCLUDED
On Sale
On Sale
KALI V2 MASTER KIT RDA/RSA BY QP DESIGN
$90.00
$85.00
Only a few left!
KALI V2 MASTER KIT RDA/RSA
Specifications and Features:
25mm Diameter
Side terminal postless deck
Squared post holes
Multi coil configuration
Adjustable Airflow
Deep Juice Well
Easy top dripping
Less spitback
Serial number
Package Includes:
Signature 810 drip tip
Custom Wide Bore Drip Tip
Black Drip Tip
Ultem Drip Tip (Polished)
Clear Drip Tip
Stainless tank
Black stainless tank
Ultem tank (Polished)
Clear tank
Stainless 810 top cap
Black 810 top cap
Squonk pin
Clear O rings
Black O rings
Flat head screws
Hex grub screws
Accessory bag
**COILS NOT INCLUDED**
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
On Sale
On Sale
ELITE V3 RDA BY IMMORTAL MODZ/ARMAGEDDON
$65.00
$60.00
ELITE V3 RDA BY IMMORTAL MODZ/ARMAGEDDON
Specs
28.5mm Diameter
30mm Tall
4mm Deep Juice Well
24mm Build Deck
New Quad Clamp Design
Double Slot Adjustable Airflow
Fits Apocalypse, Rapture and Redemption Drip Tips
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
ARMAGEDDON **NEW** APOCALYPSE 25MM RDA
$45.00
Only a few left!
ARMAGEDDON **NEW** APOCALYPSE 25MM RDA
Features:
- 25mm Outer Diameter
- Single or Dual Airflow Option
- 5mm Airflow Holes
- Teardrop Airflow Control
- 4mm Deep Juice Well
- 7mm Build Clamps
- Conical Cap
- Stainless Steel Deck
- Serialized Decks
- Classic Apocalypse Clamps with recessed screws
- Locking Cap
- 26mm Total Height
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
On Sale
On Sale
VITAL RDA IMMORTAL MODZ BY ARMAGEDDON MFG
$49.00
$45.00
Only a few left!
VITAL RDA IMMORTAL MODZ BY ARMAGEDDON MFG
- BF Pin Included
- 24mm RDA
- Apocalypse Style Deck
- Locking Cap
- Teardrop Airflow
- Slotted Top Cap (for extra grip)
- Conical Cap
- Stainless Steel Decks
- Apocalypse Sized Drip Tips
- Serialized
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
On Sale
On Sale
PURGE CARNAGE RDA 25MM
$75.00
$70.00
Purge Carnage RDA 25mm
The PURGE deck has been redesigned as the Carnage RDA.
The two post system allows for easy builds with the signature clamp and 3 flat head screws.
This 25mm RDA has a solid copper 510 pin with included silver plated squonk pin and extra o-rings. you can put your Carnage RDA on all your favorite mods.
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
On Sale
On Sale
PURGE ANODIZED ALUMINUM CARNAGE RDA
$75.00
$70.00
Anodized Aluminum Carnage RDA 25mm
The PURGE deck has been redesigned as the Carnage RDA.
NOW IN ANODIZED ALUMINIUM
Available in Red/Blue/Black and Purple
The two post system allows for easy builds with the signature clamp and 3 flat head screws.
This 25mm RDA has a solid copper 510 pin with included silver plated squonk pin and extra o-rings. you can put your Carnage RDA on all your favorite mods.
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
On Sale
On Sale
CCI The Hive RTA
$69.95
$65.00
CCI The Hive RTA
The Hive RTA by Cloud Chasers Inc. This a 28mm RTAwith INSANE capability, flavor and cloud production are astonishing! See for yourself! ***There's a video below showing all components/wicking in a review***
- 28mm base
- 30mm bubble glass
- 6.8ml juice capacity
- Massive airflow with AFC
- Ultem tip/tank
- Delrin tip included
- Open deck design
- Large clamp posts
- Beveled 7mm clamps
- Deep juice well
- 4.28mm wick holes
- Two-part reservoir system
- Custom honeycomb engraving
- Stainless construction
- Threaded lid
- Individually serialized
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
On Sale
On Sale
CCI ARCHON V2
$45.00 - $55.00
CCI ARCHON V2
The highly anticipated Archon V2 is HERE NOW! This 24mm RDA is an absolute monster.
FEATURES:
- 3 unique airflow sleeves
- 810 Delrin Tip (brass and copper have an 810 brass/copper tip instead)
- 810 metal slammed and knurled tip
- 810 ultem tip
- Delrin 510 adapter and delrin 510 tip
- BF squonk pin and post INCLUDED
- Tpost desing with massive post holes for big builds.
- DEEP juice well
- Peek insulator
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
On Sale
On Sale
BUDDHA Z V4.1 RDA BY VAPERZ CLOUD
$69.99
$60.00
Out of stock
BUDDHA Z V4.1 RDA BY VAPERZ CLOUD
Features
- Stainless Steel Construction
- Gold-Plated Deck, 510 Threads, Positive Pin
- Three-Post Build Deck
- One (1) Positive Clamp Post
- Two (2) Negative Posts
- Single Terminal Posts
- Phillips Head Screws
- Heat-Treated
- Large Heads
- 7mm Deep Deck
- Includes Two Side-Feed Airflow Options
- 36 Pin Holes
- Dual Cyclops Slots
- Wide Bore ULTEM 810 Drip Tip
- Includes Delrin Cloud Cap Chuff
- Gold-Plated Positive Pin
- Includes Gold-Plated Squonk-Ready BF Positive Pin
- Diameter: 30mm
Box Contents
- 1x Buddha ZV4.1 RDA by Vaperz Cloud
- 1x Pinhole AFC Sleeve
- 1x Cyclops Slots Sleeve
- 2x Original Cap & Delrin Cloud Chuff Cap
- 1x Squonk BF Positive Pin
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
On Sale
On Sale
Deathwish Skull & Crossbones Cloud Cap
$39.99
$30.00
Only a few left!
Death Wish Skull & Crossbones Cloud Cap
The Crossbones Cloud cap has been design with competition purpose in mind. A fixed airflow that is a bit airier than the regular unholy cap , perfect for your competition needs. Designed for the UNHOLY V1 deck only to be able to sit flush over the CROSSBONES MOD slants to make a perfect straight 26mm set , but will also work on boxes.
The Crossbones Cloud cap has been design with competition purpose in mind. A fixed airflow that is a bit airier than the regular unholy cap , perfect for your competition needs. Designed for the UNHOLY V1 deck only to be able to sit flush over the CROSSBONES MOD slants to make a perfect straight 26mm set , but will also work on boxes.
UWELL CROWN 4 SUB-OHM TANK BLACK
$34.99
Only a few left!
UWELL CROWN 4 SUB-OHM TANK BLACK
UWELL Crown 4 Sub-Ohm Tank Includes:
(1) Uwell Crown 4 Tank
(1) Spare Glass Tube
(1) 0.4 ohm Dual SS904L Coil - recommended for 60W-70W
(1) 0.2 ohm Dual SS904L Coil - recommended for 70W-80W
(1) Pack of O-Rings
(1) User Manual
(1) Drip Tip Cover
UWELL Crown 4 Sub-Ohm Tank Features:
- 6ml Max Capacity Bubble Glass Tank (Pre-Installed)
- 5ml Max Capacity Glass Tank Section
- Hand Polished Stainless Steel Construction
- Patented Self Cleaning Technology
- Pro-Flavor Optimization Core System (Pro-FOCS)
- Dual Helix Coil System
- Convenient Quarter-Turn Top Fill Design
- Bottom Adjustable Airflow Control
- Gold-Plated 510 Connection
UWELL Crown 4 Sub-Ohm Tank Specifications:
Material: Stainless Steel / Glass
Capacity: 5ml, 6ml with Installed Bubble Tank
Size: 25.7mm x 54.8mm
Weight: 55g
Threading: 510
CCI Centurion V2 30mm SS
$69.99
Out of stock
CCI Centurion V2 30mm SS
Features:
- 30mm RDA
- 1mm THICK barrels
- 3 unique airflow barrels inlcuded
- Each barrel engraved with CCI logo and Centurion V2 logo
- Serialized
- Massive Juice Well
- Stepdown AFC
- Large Clamps
- Replacement clamps included
- Recessed Flat-head clamp Screws
- Gold plated 510 and clamps
- Ultra wide bore 3mm (height) Ultem drip tip included
- Ultra wide bore 5mm (height) Delrin drip tip included
- BF Squonk pin included
- PEEK insulator
- Replacement O-rings/Screws included
- Available in Stainless Steel, Black, Gold, Neochrome, Brass, Copper, Rose Gold, Gunmetal, and Blue
- Copper and Brass REPLACES delrin tip option with a copper/brass option - Ultem tip still included as well
****** Copper and Brass comes with beveled sleeves for flush look and Stainless Steel deck******
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
CCI Centurion V2 30mm Gold Plated
$69.99
Out of stock
CCI Centurion V2 30mm Gold Plated
Features:
- 30mm RDA
- 1mm THICK barrels
- 3 unique airflow barrels inlcuded
- Each barrel engraved with CCI logo and Centurion V2 logo
- Serialized
- Massive Juice Well
- Stepdown AFC
- Large Clamps
- Replacement clamps included
- Recessed Flat-head clamp Screws
- Gold plated 510 and clamps
- Ultra wide bore 3mm (height) Ultem drip tip included
- Ultra wide bore 5mm (height) Delrin drip tip included
- BF Squonk pin included
- PEEK insulator
- Replacement O-rings/Screws included
- Available in Stainless Steel, Black, Gold, Neochrome, Brass, Copper, Rose Gold, Gunmetal, and Blue
- Copper and Brass REPLACES delrin tip option with a copper/brass option - Ultem tip still included as well
****** Copper and Brass comes with beveled sleeves for flush look and Stainless Steel deck******
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
CCI Centurion V2 30mm Black
$69.99
Out of stock
CCI Centurion V2 30mm Black
Features:
- 30mm RDA
- 1mm THICK barrels
- 3 unique airflow barrels inlcuded
- Each barrel engraved with CCI logo and Centurion V2 logo
- Serialized
- Massive Juice Well
- Stepdown AFC
- Large Clamps
- Replacement clamps included
- Recessed Flat-head clamp Screws
- Gold plated 510 and clamps
- Ultra wide bore 3mm (height) Ultem drip tip included
- Ultra wide bore 5mm (height) Delrin drip tip included
- BF Squonk pin included
- PEEK insulator
- Replacement O-rings/Screws included
- Available in Stainless Steel, Black, Gold, Neochrome, Brass, Copper, Rose Gold, Gunmetal, and Blue
- Copper and Brass REPLACES delrin tip option with a copper/brass option - Ultem tip still included as well
****** Copper and Brass comes with beveled sleeves for flush look and Stainless Steel deck******
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
SHERMAN RDA 25mm BY ASYLUM MODS NAVAL BRASS
$69.95
Out of stock
SHERMAN RDA 25mm BY ASYLUM MODS NAVAL BRASS
• 25mm deck
• Standard 810 cap
• Cloud cap
• Ultem 810 tip
• Ultem chuff
• Delrin 810 tip
• Delrin chuff
• Matching finish afc ring
• Ultem afc ring
• Standard pin
• BF pin
• Bag of spare o-rings screws and clamps
• Allen key
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
SHERMAN RDA 25mm BY ASYLUM MODS GUN METAL
$69.95
Out of stock
SHERMAN RDA 25mm BY ASYLUM MODS GUN METAL
• 25mm deck
• Standard 810 cap
• Cloud cap
• Ultem 810 tip
• Ultem chuff
• Delrin 810 tip
• Delrin chuff
• Matching finish afc ring
• Ultem afc ring
• Standard pin
• BF pin
• Bag of spare o-rings screws and clamps
• Allen key
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
On Sale
On Sale
SHERMAN RDA 25mm BY ASYLUM MODS SS
$69.95
$65.00
Out of stock
SHERMAN RDA 25mm BY ASYLUM MODS SS
• 25mm deck
• Standard 810 cap
• Cloud cap
• Ultem 810 tip
• Ultem chuff
• Delrin 810 tip
• Delrin chuff
• Matching finish afc ring
• Ultem afc ring
• Standard pin
• BF pin
• Bag of spare o-rings screws and clamps
• Allen key
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
On Sale
On Sale
SHERMAN RTA 25MM GUNMETAL & POLISHED STAINLESS
$79.00
$69.00
Out of stock
SHERMAN RTA 25MM GUNMETAL
Introducing the Sherman 25 RTA. The demand for this version has been huge. Bringing the expected exceptional flavour of the original with the dual clamp system and balanced airflow ratio but also showcasing some new features.
* removable airflow control rings
* upgraded airflow system
* removable deck while juice remains in the tank
* glass tanks as standard Same sleek look but a new experience at the versatile 25mm size.
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
KRMA XV RDA BY MISSION **SOLD OUT**
$105.00
Out of stock
KRMA XV RDA BY MISSION
Specifications:
- 22mm diameter
- Innovation design: form and function, packed into sleek, flavorful, whistle free design
- Dedicated single coil configuration
- Top-airflow system
- Leak resistant: a center-oriented, step down airflow
- Ease of build: building guides, large flat grub screws and easy lead trap channels
- Bottom feed ready
Includes:
- 1 x Mission XV KRMA RDA
- 1 x BF ready atomizer unit (22mm diameter, 22mm height with drip tip)
- 1 x 22mm SS top cap
- 1 x 22mm black delrin top cap
- 1 x 6mm bore black delrin drip tip
- 1 x 6mm bore amber ultem drip tip
- 1 x BF pin plug screw
- 4 x Flat head grub spare screws
- 4 x Spare o-rings
- 1 x BF pin plug tool
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
FATALITY RTA LIMITED EDITION **Sold Out**
$105.00
Out of stock
FATALITY RTA LIMITED EDITION BATCH 1
- 28mm Diameter
- Side terminal postless deck
- Multi coil configuration
- Replace cotton or Coils without emptying your juice
- Twist to close juice ports on filling for no leaking
- Fast and easy cotton or coil replacement
- Adjustable quad airflow
- Unique airflow Adjustment
- (Top airflow ring controls side angled airflow)
- (Bottom airflow ring controls center airflow)
Also included with each kit
- Ultem 810 Drip Tip (Polished)
- Ultem 2ml tank (Polished)
- Ultem 4ml tank (Polished)
- Clear 810 Drip Tip
- Glass 2ml tank
- Glass 4ml tank
- Chimney extension for 4ml tanks
- Accessory bag
- Flat head screws
- Black O-rings
- Serial number
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
FATALITY RTA LIMITED EDITION BY QP DESIGN **SOLD OUT**
$99.99
Out of stock
FATALITY RTA BATCH 2
Limited edition Fatality RTA
- 28mm Diameter
- Side terminal postless deck
- Multi coil configuration
- Replace cotton or Coils without emptying your juice
- Twist to close juice ports on filling for no leaking
- Fast and easy cotton or coil replacement
- Adjustable quad airflow
- Unique airflow Adjustment
- (Top airflow ring controls side angled airflow)
- (Bottom airflow ring controls center airflow)
Also included with each kit
- Ultem 810 Drip Tip (Polished)
- Ultem 2ml tank (Polished)
- Ultem 4ml tank (Polished)
- Clear 810 Drip Tip
- Glass 2ml tank
- Glass 4ml tank
- Chimney extension for 4ml tanks
- Accessory bag
- Flat head screws
- Black O-rings
- Serial number
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
There are no warranties or refunds.
Voltrove V2 (30mm) "Mini" SS is SN#0009
$79.99
Out of stock
Voltrove V2(30mm) "Mini"
The new Voltrove V2 "Mini"
-304 stainless steel
-OD = 30mm
-Drip tip: 810 compatible(12.5mm) <--- Should fit most 810 drip tips.
-19mm two post deck
-3mm post holes
-m3x4 deck screws(hex)
-Glass(All future atomizers will have only glass)
Height:
Regular = 64mm
Short = 53mm
Capacity:
Regular = 10ml-11ml
Short = 7ml-8ml
In the box:
-Short kit
-2pcs total regular sized glass(black is smoked)
-1pcs short sized glass(black is smoked)
-1pcs spares bag including short chimney, o-rings and screws
Features:
The "Mini" has all the same features as it's 41mm big brother, but in a small package!
-Vertical airflow slots to decrease turbulence and avoid the whistle.
-Juice flow control
-Massive juice flow holes in deck
The new Voltrove V2 "Mini"
-304 stainless steel
-OD = 30mm
-Drip tip: 810 compatible(12.5mm) <--- Should fit most 810 drip tips.
-19mm two post deck
-3mm post holes
-m3x4 deck screws(hex)
-Glass(All future atomizers will have only glass)
Height:
Regular = 64mm
Short = 53mm
Capacity:
Regular = 10ml-11ml
Short = 7ml-8ml
In the box:
-Short kit
-2pcs total regular sized glass(black is smoked)
-1pcs short sized glass(black is smoked)
-1pcs spares bag including short chimney, o-rings and screws
Features:
The "Mini" has all the same features as it's 41mm big brother, but in a small package!
-Vertical airflow slots to decrease turbulence and avoid the whistle.
-Juice flow control
-Massive juice flow holes in deck
MCV WARHEAD STAINLESS STEEL
$129.00
Out of stock
MCV WARHEAD STAINLESS STEEL
- 304 Stainless Steel Construction
- 30mm in diameter
- Three Post Design
- 3mm Quad Terminals
- Copper Positive Contact
- Adjustable Dual Airflow
- Tapered Wide Bore Drip Tip with Spitback Protection
- Extra Deep Juice Well
- Manufactured in the PHILIPPINES
- 5/64 Hex Tool Required (not included)
WARNING: For advanced users only. Rebuildable atomizers and mechanical mods require a basic knowledge of Ohm's law, battery amperage, electrical resistance, as well as experienced coil-building. Build and use at your own risk. Dirty Penny Vape & Ale is not responsible for misuse of products and user error. Vape only within the safe limits of the battery you use.
DEAD RABBIT CHALLENGE CAP BY HELLVAPE
$23.00
Out of stock
Dead Rabbit Challenge Cap 24MM
Butcher Challenge Cap--Naval Brass
Priest Challenge Cap--T2 Copper
24MM
Butcher Challenge Cap--Naval Brass
Priest Challenge Cap--T2 Copper
24MM
CLOUD CHASERS INC TACTICAL COIL JIG
$12.99
Only a few left!
CLOUD CHASERS INC TACTICAL COIL JIG
Cloud Chasers Inc Tactical Coil Jig
Excellent for Larger Coil Builds
- Stainless Steel Construction
- Knurled base for easy holding
- Millimeter denotations on base
- Utility socket on bottom under lid
- Screw on dust cap
- Heavy Duty tactical clip
- 3mm, 3.5mm, 4mm, 4.5mm, and 5mm cylinders
- Includes carrying sleeve
FREEMAX MESH PRO TANK
$27.00
FREEMAX FIRELUKE MESH PRO TANK
FreeMax Mesh Pro Tank Includes:
(1) FreeMax Mesh Pro Sub-Ohm Tank
(1) FireLuke Kanthal Single Mesh 0.15 ohm Coil - Rated for 40-70W
(1) Pre-Installed FireLuke Kanthal Double Mesh 0.2 ohm Coil - Rated for 60-90W
(1) Replacement Pyrex Glass
(1) Set of Replacement O-Rings
(1) User Manual
FreeMax Mesh Pro Tank Features:
- 6ml Max Capacity Large Bubble Glass Tank
- 5ml Max Capacity Bubble Glass Tank Section (Pre-Installed)
- Superior Stainless Steel, Resin and Carbon Fiber Construction
- Mesh Pro Coil System
- Convenient Push-Slide Top Fill Design
- Dual Bottom Adjustable Airflow Control
- 9mm 810 Drip Tip
- Gold-Plated 510 Connection
FreeMax Mesh Pro Tank Specifications:
Material: Stainless Steel / Resin / Carbon Fiber, Pyrex Glass
Capacity: 5ml, 6ml with Included Bubble Tank
Size: 25mm x 59.8mm
Weight: 60g
Threading: 510